Austria

Jens Günther – new Board Member for the Doka Group

The international formwork company Doka based in Amstetten, Austria, has appointed graduate construction engineer and experienced industry expert Jens Günther as the newest member of its board. From January 2017 he will take over as Chairman of the executive board when Jürgen Obiegli retires after 25 years in various senior management positions in the Group at the end of 2016. The other two members of board are Ludwig Pekarek, Production, Engineering and R&D, and Gerd Pechura, Finances and IT.

Before coming to Doka, Jens Günther, was with ThyssenKrupp from 2011 rising to CEO of ThyssenKrupp...

Related articles:

Issue 06/2017 Doka

Concremote: Digital Concrete Sensor Technology

Digitalisation in construction leads to a decisive advance: according to studies, up to 57% of the work performed in the construction process still has no added value, caused by mistakes and defects,...

more
Denmark/Germany

Doka Has Been Awarded Contract for Fehmarnbelt Tunnel

The fixed link across the Fehmarnbelt is an important contribution to the transformation of mobility in Europe. The almost 18 km long tunnel leads from Rødbyhavn on Lolland in Denmark to Puttgarden...

more
Issue 02/2010 Formwork Technology

Application of Wall Formwork without Crane

The new “HafenCity” district being built in Hamburg has necessitated the construction of a new underground railway line to link it to the city centre. The U4 line runs from the existing...

more
Issue 03/2013 Pumped Storage Station in Linth-Limmern/CH

Formwork Vibrator Application in the Mountains – Linthal  PS Station

In Switzerland since 2009 the Kraftwerk Limmern JV has been involved in setting up a new pumped storage (PS) power station within the scope of the “Linthal 2015” construction project in the...

more
Issue 08/2013 Germany

Hahnenkamp Tunnel: Tunnel Outer Walls and Trough Walls largely concreted without Anchors given constricted Space Conditions and high Groundwater

A roughly 11.5 km long, 4-lane route runs to close the gap between the A?2 and A?30 motorways – approx. 2 km as federal highway 61 and 9.5 km as the A?30 motorway and serves to relieve the centre of...

more